True Value at Oakbrook

Hand-held electric cutter designed to saw through concrete, masonry and metal up to 120 mm thick

Disc diameter: 12 in

No load RPM: gear 1: 4900 rpm

Triaxial vibration value for cutting concrete slab (ah): 5.1 m/s²

Features
Delivers far more cutting depth than angle grinders - you can saw through 120 mm thick materials with a 305 mm blade
Ensures a virtually dust-free job site when used with a compatible vacuum cleaner
Achieve even greater productivity gains by using with specifically developed Hilti cutting discs
Protection against overheating and overloading - prolongs the cutter's lifetime and increases the operator's safety

Applications
Cutting reinforced concrete, granite curbstones, slabs, brick and masonry blocks
Cutting metal beams, steel pipes and reinforcing bars
Making preliminary cuts for controlled demolition
Cutting and extending openings for windows, doors and shafts

Versatile, rear-handle, hand-held 70 cc gas saw with auto-choke - cutting depth up to 5"

Motor cylinder: 68.7 cm³

Rated power: 3.5 kW

Wet or dry operation: Wet and Dry

Features
Most versatile tool in its class
Easy start - unique auto-choke design
Pre-tensioned belt - no belt maintenance required by the user
Reinforced metal blade guard including belt cover with integrated wear ribs
Easy self-service maintenance - including starter rope and filter replacement

Applications
Laying paving: cutting curbstones and paving slabs to size
Road construction: perimeter cutting in asphalt and concrete
Floor construction: cutting expansion joints in fresh concrete
Metalwork: cutting steel profiles, pipes and steel sheets
Construction work: cutting out openings in brick or concrete walls

Powerful SDS Plus (TE-C) cordless rotary hammer for heavy-duty concrete drilling and corrective chiseling

Weight according EPTA-Procedure 01/2003: 11.2 lb.

Optimum Hammer drilling range: 13/32 - 25/32 in

Hammer drilling diameter range: 5/32 - 1-3/32 in

Very powerful SDS Max (TE-Y) rotary hammer for heavy-duty concrete drilling and chiseling, with Active Torque Control (ATC) and Active Vibration Reduction (AVR)

Weight according EPTA-Procedure 01/2003: 20.9 lb.

Single impact energy: 8.5 ft-lbs

Hammer drilling diameter range: 15/32 - 2-5/32 in

Features
Highest productivity for a wide range of drilling and chiseling applications
Low contact pressure for high user comfort
Active Vibration Reduction (AVR) makes the tool less tiring to use - helping to increase daily productivity
Optional DRS-Y dust removal system collects up to 95% of dust
Ruggedly built for a long lifetime

Applications
Hammer drilling in concrete, masonry and natural stone with drill bits 12-150 mm in diameter
Drilling holes for heavy-duty anchors from 20-40 mm in diameter
Breaching and demolition with pointed and flat chisels
Drilling with high torque in wood and steel
Hammer drilling in concrete, masonry and natural stone with drill bits 1/2" - 6" in diameter

12-inch auger with Standard style digging head. For loose/sandy soil conditions. Uses a screw-in fishtail center pilot and hardfaced bolt-on Standard style side blade. Comes ready to dig with one Part# 100 Fishtail Pilot and one Part# 912 side blade installed. Includes one Part# 1300 attachment pin and clip.

10-inch auger with Standard style digging head. For loose/sandy soil conditions. Uses a screw-in fishtail center pilot and hardfaced bolt-on Standard style side blade. Comes ready to dig with one Part# 100 Fishtail Pilot and one Part# 910 side blade installed. Includes one Part# 1300 attachment pin and clip.

8-inch auger with Standard style digging head. For loose/sandy soil conditions. Uses a screw-in fishtail center pilot and hardfaced bolt-on Standard style side blade. Comes ready to dig with one Part# 100 Fishtail Pilot and one Part# 800 side blade installed. Includes one Part# 1300 attachment pin and clip.

6-inch auger with Standard style digging head. For loose/sandy soil conditions. Uses a screw-in fishtail center pilot and hardfaced bolt-on Standard style side blade. Comes ready to dig with one Part# 100 Fishtail Pilot and one Part# 670 side blade installed. Includes one Part# 1300 attachment pin and clip.

The Ground Hog ModelONE is a small, hand-held, one-man auger that is designed from the ground up for Commercial and Rental use and also for a great end-user experience.

Ground Hog Inc. has been making larger earthdrills for over 70 years and when we decided to build a smaller one-man machine, we wanted it to be the best. One-man earth drills have been around a long time and they haven’t changed much. We wanted to design a high quality machine that is improved and refined in every possible way. We think we have accomplished that goal.

At the heart of the ModelONE is the transmission and it is designed to take abuse. A 3-inch centrifugal clutch transfers the engine’s power to heat-treated billet steel gears. Oversized bearings are used throughout. The sealed, grease-filled cast aluminum gearcase is heavily reinforced with ribbing to make it incredibly strong without adding unnecessary weight. All of this allows the transmission to easily handle the torque, shock and also the impact and side stresses on the auger bit.

The Ground Hog HD99 is a Towable Hydraulic Earthdrill that is designed to be powerful, easy to use and require very little maintenance.

The HD99 is the most powerful earthdrill in the Ground Hog line. With it's 9hp Honda or Subaru engine, the HD99 can easily dig with any Ground Hog auger up to 18 inches in diameter. The use of hydraulics allows the HD99 to have variable auger speed and reverse which is very useful if the auger gets stuck.

The Ground Hog C-71-5 is two-man earth drill designed to deliver years of reliable service with superior performance. It has been a proven performer for over 40 years. It’s rugged design promotes durability and requires very little maintenance.

The heart of this unit is our time-tested transmission. The transmission is an efficient worm drive design utilizing alloy steel shafts, large tapered roller bearings and our standard 7/8" square auger drive.

Aluminum castings are used throughout the C-71-5's construction to produce a unit that is both strong and lightweight. The C-71-5 uses an air cooled centrifugal clutch and a trigger-type, return-style throttle. Both operator positions are equipped with individual stop switches and tubular steel handlebars.

The C-71-5 is available with 3 engine options; Honda, Briggs & Stratton Intek and Subaru.

The RentalPro 230 is a solid workhorse sprayer with performance points to cover both interior and exterior painting needs. Lightweight and portable, the RentalPro 230 is the ideal sprayer for rental yards.

Easy to Use Self-Contained Carpet Extractor

The amazing Fivestar is a small, self-contained carpet extractor with powerful brush agitation to effectively clean carpets. It weighs only 40 pounds so it’s light enough for anyone to handle, plus the compact body design and fold-down handle make it a breeze to transport and store.

A revolutionary bladder design allows you to fill and empty out of the same bucket and eliminates the need to pour cleaning solution into the machine. Simply fill the bucket, set it on the machine, close the lid and begin cleaning. No more spills or mess!

The Fivestar is small enough to clean tight spaces and corners yet powerful enough to perform well in any commercial setting. Add the optional upholstery kit and the Fivestar becomes an all-in-one carpet & upholstery cleaning package.

Simple Maintenance

Remove two screws and the machine opens like a clamshell for fast service. Component wiring with quick connects makes it quick & easy to service or replace components.

Our upholstery cleaning tool kit contains our black powder coated detailer tool model 321ACH, 8' hose assembly, hose fittings and a durable mesh hose bag.

Our 321AC tool is cast aluminum with a black powder coat finish and an enclosed spray chamber. A round glass window gives you the ability to monitor your progress as you lift off stains and debris. Recirculating notches decrease water build-up in spray chamber for faster drying time.

For use on FiveStar and Comet models only.

Electric floor strippers remove vinyl, linoleum, carpet, rubber, and other softer coverings from concrete floors. The "Tile Shark" is 110 volt and can be used for limited wood applications, but not for ceramic tile removal.

Remove up to 200 sq. ft. per hour of vinyl or other related soft material (Square footage amounts and time schedules will vary based on material and adhesion)
Folding handle for easy transport & storage
Sharktooth wrench for easy blade changes
Heavy-duty steel material deflector shield
Multiple position hand held assembly
Heavy-duty flexible rubber isolators
Belt-driven oscillating blade system provides 1,850 oscillating hits per minute
Quick release pin angle adjustment
7-Gauge steel welded construction
Push plate & built-in weight make material removal a quick & easy job
Pinch blade system accepts floor stripper blades of any make & size

The E-Z Trench Bedscaper bed edger features our patented blade design that reduces vibration and operator fatigue as well as zero-Turn steering; making creating tight tree rings and beautifully shaped beds fast and easy! The model BE400 Bedscaper is the premier landscape edger on the market today.

The Bedscaper BE400 bed edger has more power and the added durability of a centrifugal clutch that is bathed in oil. Depth adjustment is controlled at the handles as well as the throttle. The BE400 can also trench 7" deep!

Great for:

Creating Beautiful Curved Landscape Beds
Redefining Existing Beds with Precision
Installing Metal or Plastic Edging
Installing Concrete Pavers (Paver Blade Required)
Installing Landscape Timbers (Paver Blade Required)
Installing Low Voltage Lighting or Underground Pet Fencing

Engine 389cc Honda GX Engine w/ Cyclone Air Cleaner

Fuel Type Gasoline

Teeth Greenteeth® 700 Series Teeth (8)

Cutter Wheel 14" Dia. x 3/8" Thick

Disc RPM 2200 RPM

Drive Direct Belt Drive; 3 Groove Power Band with Idler Bearing Belt Tensioners

Tires 4.80/4.00-8" Adjustable Brake Band

Weight 300 lbs

Dimensions 58"L x 32"W x 51"H

Cutting Capacity 20" Above Grade, 16" Below Grade

Reinforced cross section and husky backbone prevents warping

Slightly curved broken-in shape saves tedious break-in time

Includes Bon’s Universal Threaded Handle Bracket #12-376

48" x 8" square end aluminum bull float

Made of thick anodized aluminum to prevent hands from turning black

Threads are easy to clean, easy to join and fit most standard handles andadapters

Wheelbarrow mixer equipped with easy-to-clean thick polyethylene drum

Tubular steel frame is mounted with 16" pneumatic tires

Handles slide forward for storage

Drum maximum batch capacity of 2 cu. ft.

1725 RPM

.5 HP Electric 115v motor

The PR550 efficiently removes matted thatch from turf in 20" (51 cm) passes, and its rugged design withstands the most demanding use.

Because the rotation is down sweep, the flails propel the PR forward, making it self-propelled and reducing fatigue.

Additionally, because it weighs slightly more than other power rakes on the market, with steel guards, heavier wheels, premium bearings, and a 10-gauge (3,6 mm) steel engine base, the PR absorbs much of the vibration before it is transferred to the handle, which improves operator comfort and handling.

This PR comes standard with Honda engine coupled to a free swinging , heat treated, tempered flail blade reel, mounted to heavy-duty cast iron pillow block bearings with grease zerks. The PR is convertible to overseeder or vertislicer with optional accessories.

Billy Goat’s self-propelled overseeder reduces fatigue associated with pushing and features intuitive forward and reverse operator controls. New to the unit is a blade design that reduces thatch and improves blade life due to its sharpened leading edge and attack angle combined with a new foot actuated height adjust that raises and lowers the reel effortlessly, providing more blade depth. The unit is 22" wide with an exclusive 11-blade slicing reel that floats along contours of yards increasing seed to soil contact and improving germination rates. The unit comes standard with a 30 lb. seed box that is generously elevated above the turf to eliminate any clogging that may occur from moisture. (Pictured without optional seed box cover.)

Step up to commercial clean up power. The unit is ideal for medium size maintenance contractors and large property owners.

This F902H model is built to clear 2.000m2 from leaves in only 45 minutes. The unit is backed by a 3-year Honda engine warranty.

Increased power.

Step up to the heavy-duty brush cutter power of the BC Pivoting Deck Series and dramatically improve your productivity and profitability.

The BC26 has a 26"/ 66 cm wide pivoting deck with higher tip speed for improved speed and cut quality. Engineered to glide over uneven terrain, the pivoting brush deck hugs the ground for a better cut. This minimises scalping and improves traction by keeping the weight of the machine on its drive wheels.

This nature-taming performer comes standard with a Tuff Torq™ variable hydrostatic transmission featuring fully automatic Enhanced Traction Control (ETC), offering superior traction in wet or uneven conditions.

The BC2600HH and BC2600HEBH brush cutters can cut saplings and brushes all at a rate of just under an acre of brush per hour.